Electricity Cost Calculator

⚡ Powered by Irfan Khan · learnhvacpro.com
⚡

Calculate Your Electricity Bill — Any Appliance, Any Country

Find out exactly how much any appliance costs to run — AC, fan, cooler, or anything else

100% Free 🌍 Works Worldwide

Use this electricity cost calculator to find out in seconds how much any home appliance, such as an AC, fan, cooler, water heater, fridge or washing machine, adds to your monthly electricity bill. Just select an appliance or enter its power rating, enter the daily usage hours and your local electricity rate, and the calculator instantly shows the daily, monthly and yearly cost in any currency.

Appliance & Usage Details

Pick an appliance below, or choose “Other / Custom” to enter your own.

🧊 Refrigerators cycle on/off — 150W is the typical average running power, not a constant draw. Hours has been set to 24 (edit if needed).
Please enter a valid power value.
Please enter hours between 0.1 and 24.
Please enter a valid rate.
Estimated Cost
0 / month

Based on your usage & rate

Daily
–
Monthly
–
Yearly
–

Why this result?

    Formula: Daily units (kWh) = Power (kW) × Hours/day. Daily cost = Daily units × Rate. Monthly = Daily cost × 30. Yearly = Daily cost × 365.

    💡 Tip: Switching to an inverter AC can reduce this cost by up to 30% compared to a non-inverter unit.
    📱 Share on WhatsApp

    Not sure of your AC size? Calculate it here →

    Open AC Tonnage Calculator
    electricity cost calculator for AC fan cooler appliances

    How This Electricity Cost Calculator Works

    This electricity cost calculator is based on a simple formula. Power in watts is divided by 1000 to get kilowatts (kW), then multiplied by the daily usage hours to get daily units (kWh). Multiplying the daily units by your electricity rate gives the daily cost. Multiply that by 30 for a monthly estimate and by 365 for a yearly estimate, which is the same method an electricity board uses to calculate meter readings.

    Why Track Your Appliance’s Electricity Cost

    In Gulf countries, especially the UAE and Saudi Arabia, the AC is the biggest electricity consumer in the summer months, sometimes making up 60–70% of the total bill. With this electricity cost calculator you can estimate in advance how much a new AC, water heater or washing machine will add to your monthly costs before you buy it, so you can choose an energy-efficient appliance and avoid unnecessarily high bills. For more on consumption patterns and official rate structures, see the U.S. Energy Information Administration electricity resource.

    Frequently Asked Questions

    Does this calculator work for all countries?

    Yes, this electricity cost calculator works for any country or currency. You just need your area’s electricity rate per unit (kWh), found on your local electricity bill.

    Where do I find my electricity rate?

    Check the rate per unit or tariff on your monthly electricity bill, or check slab rates on your electricity board’s official website (such as DEWA or SEWA in the UAE).

    Powered by Irfan Khan · learnhvacpro.com
    More free tools & HVAC resources at learnhvacpro.com

    Electricity Cost Formula

    The cost of running any appliance depends on three things: its power in watts, the hours it runs, and your electricity rate per kWh. The electricity cost calculator above uses this electricity cost formula:

    Daily units (kWh) = Watts ÷ 1,000 × Hours per day
    Daily cost = Daily units × Rate per kWh
    Monthly cost = Daily cost × 30
    Yearly cost = Daily cost × 365

    Example 1: an AC rated at 1,800 W runs 8 hours a day and your rate is 0.30 per kWh (any currency). Daily units = 1,800 ÷ 1,000 × 8 = 14.4 kWh. Daily cost = 14.4 × 0.30 = 4.32. Monthly cost = 4.32 × 30 = 129.60. Yearly cost = 4.32 × 365 = 1,576.80.

    Example 2: some nameplates show volts and amps, not watts. For a single-phase appliance, Watts = Volts × Amps × Power factor. With 230 V, 8 A and a power factor of 0.8, the power is 230 × 8 × 0.8 = 1,472 W, or 1.472 kW. Use the power factor printed on the nameplate if there is one.

    Appliance Running Cost Table

    This table uses the same appliance power values as the electricity cost calculator above. Every row uses 8 hours a day and a rate of 0.30 per kWh, so you can compare them side by side. Real use differs, so enter your own hours and rate in the calculator.

    AppliancePowerkWh per dayCost per dayCost per month
    Ceiling fan75 W0.600.185.40
    LED TV100 W0.800.247.20
    Refrigerator150 W1.200.3610.80
    Air cooler180 W1.440.4312.96
    Washing machine500 W4.001.2036.00
    AC, 1 ton1200 W9.602.8886.40
    AC, 1.5 ton1800 W14.404.32129.60
    AC, 2 ton2400 W19.205.76172.80
    Water heater2000 W16.004.80144.00

    Cost per month is the cost per day multiplied by 30. The values are rounded to two decimals.

    More Electricity Cost Questions

    How do I calculate kWh?

    Multiply the power in kW by the hours used. Convert watts to kW by dividing by 1,000. Example: 1,800 W for 8 hours = 1.8 kW × 8 h = 14.4 kWh.

    How much does a 1.5 ton AC cost to run?

    The electricity cost calculator’s 1.5 ton AC preset is 1,800 W. At 8 hours a day and a rate of 0.30 per kWh, that is 4.32 per day and 129.60 per month. Your real cost depends on the input power on the AC nameplate, your rate and your hours.

    Is AC cooling capacity in kW the same as electrical power?

    No. Cooling capacity is the heat the AC removes. Electrical power is what it draws from the supply, and it is much lower. Always use the electrical input from the nameplate in this calculator. See the HVAC Unit Converter for the difference.

    How do I convert watts to kW?

    Divide the watts by 1,000. For example, 1,500 W = 1.5 kW. This electricity cost calculator also has a kW button, so you can enter the power in either unit.

    More Free HVAC Tools